Special High Pressure Project

This high pressure project was a 72” OD x 96” Scrubber for LNG.
It will operate at 625 PSIG and is designed to 800 PSIG and hydro tested at 1100 PSIG.

With 1-3/4” thick heads and shells it weighs in at 28,000 Lbs.
Vessel was Fully X-RAY and heat treated it will be used in Texas.
It also included several platforms.

Special High Pressure Project - TetraSOLV

Special Design Project

This vessel was recently completed in our new fabrication facility.
The 12’D elevated vessel was fabricated for a semi-conductor manufacturer.

Due to their strict water quality requirements the vessel was rubber lined and cured to eliminate any impurities.

special design project tetrasolv

Large International Treatment Project

This project consisted of (4) 40’ containers and (6) 20’ containers converted to gravity water treatment filters to treat 3000 gpm.

The location was a large mining project in NW Australia to remove hydrocarbons from their waste water.

large international treatment project tetrasolv